Instruction manual

24
tachometer in such situations. Make connections as defined below or follow
manufacturers instructions. Set Dip Switches and install any necessary drivers for
Rem applicabl m. connection per section 4.2.1.2
TACHTROL/TACHPAK 30
converter device as directed by manufacturers instructions.
4WSD9TB
Designation Designation Pin
GND GND 1 or 5
RDA- Tx - 2
TDA - Rx - 3
RDB+ Tx + 6
TDB+ Rx + 7
N/A Not Used 4,8 ,9
RS-232
DB9 Ca
⇐ Tach
RS-485
ble (straight thru)
RS232
–
RS485 converter
ember to se e Comlect the