Specifications

Connect-Tek Over IP

B. Configuring your CTIP-01

The Admin/Setup Screen

This is the menu that will allow you to access all the features you will need to perform an initial configuration

of the CTIP-01. Each of the options is explained as following:

I. How to Setup the IP Address for your CTIP-01

As you get the Admin/Setup screen, please click on Network Configuration (IP address. Netmask, etc).

Dynamic Host Configuration Protocol (DHCP)

Automatic network configuration using DHCP is: Enabled/Disabled.

This feature applies only to the LAN port on the rear panel, and is enabled by default. When enabled, the unit

will automatically configure itself with an IP address when a DHCP server is present. When disabled, the

LAN port will use the values assigned to it on the IP Addresses and Routing table below.

Current DHCP Lease Information

This box provides detailed information about the IP lease that the unit has obtained from the DHCP

server.