Specifications

Connect-Tek Over IP

Step 4: Change “Bits per second” to 115200.

Step 5: Press “Enter”, you will get the following screen.

Step 6: Follow the instructions on the screen. For setting up your IPs, you have to key in “IP Address”,

“Netmask”, and “Network Gateway” for both of the LAN port and WAN port by typing

•“I”: key in your IP address for the LAN port of CTIP-01.

•“N”: key in your Netmask for the LAN port of CTIP-01.

•“G”: key in your Network Gateway for the LAN port of CTIP-01.

•”I2”: key in your IP address for the WAN port of CTIP-01.

•”N2”: key in your Netmask for the WAN port of CTIP-01.

•”G2”: key in your Network Gateway for the WAN port of CTIP-01.

Here is a reminder, please type “W” after you made any change.

C. Disabling Mouse Acceleration on the Host Computer and Client Computer

As soon as you finish the instructions of one of the above three methods, please do remember to disable