Xtreme/SBC PCIe/104 Single Board Computer & PCIe/104 Qseven Carrier Board User Manual Connect Tech Inc. 42 Arrow Road Guelph, Ontario N1K 1S6 Tel: Toll: Fax: Email: Web: 519-836-1291 800-426-8979 (North America only) 519-836-4878 sales@connecttech.com support@connecttech.com www.connecttech.com CTIM-000058 Revision 0.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Table of Contents Customer Support Overview .......................................................................................................................... 4 Contact Information........................................................................................................................................ 4 Limited Lifetime Warranty .......................................................
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Battery..................................................................................................................................................................... 23 Description ....................................................................................................................................................23 Connector & LEDs ....................................................
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Customer Support Overview If you experience difficulties after reading the manual and/or using the product, contact the Connect Tech reseller from which you purchased the product. In most cases the reseller can help you with product installation and difficulties. In the event that the reseller is unable to resolve your problem, our highly qualified support staff can assist you.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Limited Lifetime Warranty Connect Tech Inc. provides a Lifetime Warranty for all Connect Tech Inc. products. Should this product, in Connect Tech Inc.'s opinion, fail to be in good working order during the warranty period, Connect Tech Inc.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Introduction Connect Tech’s Xtreme/SBC is a small embedded carrier board that utilizes the PCI/104-Express form factor, which has the standard PC/104 dimensions with 4 x1 PCIe lanes. This carrier board includes the required connectors and cables for easy connection to 2x SATA, 2x RS-232, 2x RS422/485, 4x USB 2.0, 1x Gigabit Ethernet, LVDS and VGA Video.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual System Block Diagram The Qseven module implements the core processing features including: processor, memory, and system physical interfaces via the southbridge. Many of the Qseven modules are based on the mobile Intel Atom architecture (Z series processor + Poulsbo / SCH US15W chipset); shown in the block diagram below. This document will generally refer to the features of the US15W. Revision 0.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Hardware Description Connector Locations PCI/104-Express Single Board Computer – Top PCI/104-Express Single Board Computer – Bottom Connector Summary Location 8 Connection P1 Q7 P2 PCIe-104 P3A, P3B USB P4 GBE P5 Jumper Summary VGA Jumper Function J1 PS/2 power J2 Fan Power J3 Fan PWM polarity J4 LVDS panel power J5 LVDS backlight enable polarity P6 ATX Power P7 LVDS Video
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Qseven Module Interface Description The processor and Chipset are implemented on the Qseven CPU module, which connects to the Xtreme/SBC via a MXM connector. As previously mentioned, many of the existing Qseven Modules use the Intel Atom mobile architecture, Z series processor + Poulsbo / SCH US15W chipset. The Xtreme/SBC implements a subset of the Qseven features, as describe in the introduction.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual LVDS Description The Xtreme/SBC provides dual 18 or 24 bit LVDS display channels via P7, which are connected directly from the Qseven module . LVDS panel supply power is selected with jumper J4 and backlight power is selected with jumper J6. Both are current limited to 500 mA. US15W: The US15W provides only a single 18 or 24 bit display channel.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Function LVDS backlight power Location P8 Type Hirose DF13-8P-1.25H connector Pinout Pin Signal Description 1 +12V +12 V DC, max. 1A 2 +12V +12 V DC, max. 1A 3 +5V +5 V DC, max. 1A 4 +5V +5 V DC, max.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Function LVDS backlight enable polarity Selects either positive or negative. Refer to the inverter power supply documentation for proper configuration.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual USB 2.0 Description The Xtreme/SBC implements 4 of the 8 available USB 2.0 connections via two connectors. Over current protection and power supply filtering is provided. Only the USB host features of the Qseven specification have been implemented, USB client features are not supported. Connector Function USB 2.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Connector & LEDs Function SATA host Locations P10A, P10B Type P10A Industry standard right angle sata host connector Molex 0470804005 (or equivalent) Pinout Pin Function Signal 1 GND 2 SATA_TX_P 3 SATA_TX_N 4 GND 5 SATA_RX_N 6 SATA_RX_P 7 GND P10B SATA Status LEDs Locations Pin Signal D13 Activity PCI/104-Express Description The Xtreme/SBC provides 4 x1 PCIe lanes to the PCI/1
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Pin Description Pin Description Pin 1 N/C 53 WAKE# 105 2 PE_RST# 54 PEG_ENA# 106 3 +3.3V 55 GND 107 4 +3.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Function PCI-104 top mount – mechanical only, does not carry signals Locations P12 Type Industry standard EPT 264-60303-02 Note Connector is not populated by default. Can be installed on request. LPC Super I/O The Xtreme/SBC implements many low speed legacy I/O features with the SMSC SCH3114 Super I/O, which is connected to the Qseven module via the LPC (Low Pin Count) bus.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Serial Description Two RS232 serial ports are provided on P9 and two RS485 serial ports are provided on P11. For the RS485 ports, the default configuration is full duplex without any bias or termination. Various resistors configurations can be populated to enabled TX and RX termination as well as RTS control. The following diagram shows the available configuration options.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Connectors Function RS232 x2 Locations P9 Type Pinout Function 2x10 2mm header Pin Signal Pin Signal 1 DCD1 2 DSR1 3 RXD1 4 RTS1 5 TXD1 6 CTS1 7 DTR1 8 RI1 9 GND 10 N/C 11 DCD2 12 DSR2 13 RXD2 14 RTS2 15 TXD2 16 CTS2 17 DTR2 18 RI2 19 GND 20 N/C RS485 x2 Locations P11 Type 2x10 2mm header Pinout 18 Pin Signal Pin Signal 1 RXD0+ 2 N/C 3 TXD0+ 4
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual PS/2 Keyboard and Mouse Description A PS/2 keyboard and PS/2 mouse interface are provided via P13; where the PS/2 voltage is selectable with J1. Refer to the specification printed on the bottom of the keyboard and mouse to determine which voltage to select; in most cases this is 5V.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Power Description The Xtreme/SBC is designed to be powered from an ATX type power supply, and support many of the ACPI features like suspend to RAM. A CR1225 battery holder (P16) provides the VBAT for the Qseven module. The Xtreme/SBC generates 3.3V on board, to facilitate alternate powering options. WARNING: Do not attach a PCIe-104 power supply to P2 (the PCIe104 connector).
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Function Suspend Selection Selects either S3 or S5.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Fan Control Description If actively cooling is required; P14 can be used to power and control a fan with J2 selecting the fan voltage.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Battery Description A CR1225 battery holder is provided at P16. This is a standard 3V battery, which powers the RTC (real time clock) on the CPU module. In most cases, it is not required to preserve critical BIOS settings as most Qseven modules have a flash based BIOS. Connector & LEDs Function Battery Location P16 Type CR1225 battery holder Hardware Installation 1.
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual 6. Connect the appropriate I/O peripherals to the interface cables: keyboard, mouse, Ethernet, monitor, etc. 7. Connect the power cable to power supply 8. Turn on the supply. Software Installation & Configuration In general, always refer to the Qseven module’s manual for proper installation of drivers and configuration software; as well as for appropriate BIOS settings.
Cables & Interconnect The following table summarizes the Xtreme/SBC’s headers and lists the matching cables included with the optional cable kit CKG001. Location PCB Connector Cable Part Number Drawing Number Description PCB End Interface End P3A, P3B Hirose DF13-8P-1.25H(50) CBG071 CTIC-00182 USB (dual) Hirose DF13A-8S-1.25C USB 2.
Dimensions
Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual Specifications Form Factor PCIe/104, 4 x1 PCIe lanes Display VGA, LVDS flat panel Storage 2x SATA (7 pin connector) Serial Interface 2x RS-232, 2x RS-485 USB 4x USB 2.0 Ethernet 1x Gigabit Ethernet Dimensions PC/104 compliant Temperature -20ºC to 70ºC (-4ºF to 158ºF) Power ATX supply input Power Consumption 850 mA @ 5V [1] Qseven carrier circuitry only. Does not include module power.
