Hardware manual

Content
Copyright IXXAT Automation GmbH
3
CAN-IB130/230/PCIe104 Manual, V1.0
1 Introduction .................................................................................... 5
1.1 Overview ................................................................................. 5
1.2 Features .................................................................................. 5
2 Installation ...................................................................................... 5
2.1 Software installation .............................................................. 5
2.2 Hardware installation ............................................................. 5
3 Connections ................................................................................... 6
3.1 PCIe/104 connector ................................................................ 6
3.2 Field bus connection ............................................................. 7
3.2.1 CAN high speed (ISO 11898-2), channel 1-4 .......................... 7
3.2.2 CAN low speed (ISO 11898-3), channel 1 ............................... 7
3.2.3 LIN, channel 2 .......................................................................... 7
3.2.4 Pin assignment of the 10 pin box header (channel 1-4) .......... 7
3.2.5 Pin assignment of the DSub-9 plug (channel 1-4) ................... 8
4 Programming the firmware ............................................................ 8
5 Support ........................................................................................... 8
6 Returning hardware ....................................................................... 8
7 Information on EMC ....................................................................... 8
8 Appendix ......................................................................................... 9
8.1 Technical data......................................................................... 9
8.2 FCC compliance ................................................................... 10
8.3 EC declaration of conformity .............................................. 10