Operating instructions

M300USERSGUIDE SEA
PROJECTMANAGEMENT  97
As you can see the demo project has no boards in the board project tree.
The default board type is ‘System’, which is the type of board we want to add. Type ‘system’ for
Name and leave the Number at 0. Basically, we are adding a system board number 0.
Click on I
nsert.
Leave all the parameters in the default values. Click D
one to finalize the insert of the board.
Note: Forafulldescriptionofthesystemboarddialog,(See “System Board” on page 160).
When you go back to the board setup, you see now that the system board is part of the demo project.
When finished, close the Board Setup dialog, click on Done, again.
When the Board Setup closes, you will see the M300 main window in the front. You should notice
that the ‘ACQ’ button is now enabled in the tool bar. We can click on the ‘ACQ’ button and then
we can click on the Play button.
When you look at the M300 main window it will display date and time, with the time increment at 1
hz. This means M300 is configured and running.