Operating instructions
SEA M300USERSGUIDE
PROJECTMANAGEMENT
96
CONFIGUREANEWPROJECT
Use the instructions in the (See “New Project” on page 92), to create a new project. The path we will
use is /check and the project name is demo, We end up with a /check/demo project.
The project just created is empty. If you look at the M300 menus for board, acquisition and buffer
setup it’s all empty. All the project trees are blank.
Another peculiarity of an empty project, is that you are not allowed to do acquisition on it. Since
there is no system board present.
All M300 projects must have one and only one system board. This is usually the first step when we
create the project.
Use the instructions in the (See “Board Setup” on page 105), to open the board dialog.