Operating instructions

SEA M300USERSGUIDE

PROJECTMANAGEMENT



SAVINGAS

1. In the Project menu, select Save As. (Shortcut: Alt + P, A).

2. In the Subdirectory List, select which directory the new project is to be placed into or to go up

one level, select the folder named ‘..’.

3. The Path list will give you a quick list of the most recently used projects. This project path list is

used in the other project menus as well.

4. Type the new project name you want in the Project field and click on Save. If you wish to cancel

this operation at any time, click on Cancel.

Note: Theprojectnamemustnotcontainspaces.SpacesarehardtodealwithinQNX4system.Keepthe

projectnamesmeaningful,butsimple.Allprojectnamesarecasesensitive.

WARNING:Ifyoucreateaprojectwithanamethatalreadyhasbeencreatedinthatdirectory,itwillnotbe

possible.

Youmustfirstremovetheproject.Wehavedonethistopreventoverwritingofprojectdirectories.

5. If there was a project previously opened and it was modified, you will be asked to save that

project.

6. A new project folder with the name of the new project will be created. The project will have the

same information as the project that was open.

Note: TheM300doesnotsavesomefilesthatopenforreadonlypurposes.Forexample,thecdp30.def. This

fileswouldhavetogetcopiedmanually.