Operating instructions

M300USERSGUIDE SEA
PROJECTMANAGEMENT  93
OPENPROJECT
1. In the Project menu, select Open.(Shortcut: Alt + P, O)
2. In the Subdirectory List, select which directory the project is in or to go up one level, select the
folder named ‘..’.
3. The Path list will give you a quick list of the most recently used projects. This project path list is
used in the other project menus as well.
4. Select the directory you want and click on Open. If you wish to cancel this operation at any time,
click on Cancel.
5. If there was a project previously opened and it was modified, you will be asked to save that
project.
6. The project is loaded into the M300. The current project name is displayed in the M300 title
bar. Also, you should have displays/board/acquisition that go with the project.
Note: As theuserusesprojects,theygetaddedtotheprojecthistorylistintheprojectmenu.Iftheproject
youwanttoopenisonthelist,youcanopenitthere.
SAVE
If you are certain that the changes you have made to the M300 project are desirable, then you can
save the project.
1. In the P
roject menu, select Save. (Shortcut: Alt + P, S).