Operating instructions

SEA M300USERSGUIDE

PROJECTMANAGEMENT



NEWPROJECT

Note: M300projectscanno tbesavedontotherootdirectory‘/’.Usersmustfirstcreateadirectoryfromthe

rootdirectory(i.e./2001)andthencreatetheprojectoffofthatdirectory(i.e./2001/hurricane).

1. In the Project menu, select New (Shortcut: Alt+P, N).

2. In the Subdirectory List, select which directory the new project is to be placed into or to go up

one level, select the folder named ‘..’, which is the parent folder.

3. Alternatively, you may select the path to the project in the Path drop down list. This keeps a list

of the most recently used project path names. This project path list is used in the other project

menus as well.

4. Type the project name you want in the project field and click on New. If you wish to cancel this

operation at any time, click on Cancel.

Note: Theprojectnamemustnotcontainspaces.SpacesarehardtodealwithinQNX4system.Keepthe

projectnamesmeaningful,butsimple.Allprojectnamesarecasesensitive.

5. If there was a project previously opened and it was modified, you will be asked to save that

project.

WARNING:Ifyoucreateaprojectwithanamethatalreadyhasbeencreatedinthatdirectory,itwillnotbe

possible.Youmustfirstremovetheproject.Wehavedonethistopreventover writingofprojectdirectories.

6. A new project folder with the name of the new project will be created.

To configure a new project, (See “Configure a New Project” on page 96).