Operating instructions

SEA M300USERSGUIDE
DATAOPERATIONS  88
For the second M300 system.
Start the M300 and then change the UDP broadcast settings.
To change the UDP settings for the M300 (See “General Tab” on page 76).
We will setup the Port Name to radar-udp (port 2000).
Then we can follow the instructions for Acquisition mode, (See “Acquiring Data” on page 80).
We will need to make sure we enable the broadcast button (See “Broadcasting Data” on page 83).
HOWTOSETUPUDPRECEIVEFROMMULTIPLESYSTEM
We will assume that both M300 systems for UDP will be done in the same system.