Operating instructions

SEA M300USERSGUIDE
DATAOPERATIONS  82
PLAYBACKDATA
To playback data with the M300 system is fairly easy.
1. Start M300 system (See “How to Start M300” on page 34).
2. Load the desired project (See “Open Project” on page 93).
3. If the M300 system was left in play mode, then click stop button first.
4. Then we must pick playback from the mode group. Basically we click on the second button from
the tool bar (See “Tool Bar” on page 59).
5. Then must open a data file. I used the file menu and opened a file that was in the file menu
history. (See “File Menu” on page 54).
6. Finally you click on the play button from the M300 tool bar (See “Tool Bar” on page 59).
7. If you need to change the playback speed, click on the Playback Tab and leave there so you can
modify the playback speed (See “Playback Tab” on page 68).