Operating instructions

M300USERSGUIDE SEA
DATAOPERATIONS  79
OPERATINGINSTRUCTIONS
The M300 has three distinct operational modes. Acquisition, Playback and UDP are all modes in
which the M300 can be used to process data.
The M300 software allows the user to have more than one M300 session (project), running on each
system. This creates confusion, at first, on how to distinguish between starting a new session or
bringing an existing sessions to front.
STARTANEWM300SESSION
When you click on the M300 icon from the SEA Tab, you start a new session of the M300 software.
For each session of the M300 software you are allowed to open a project and work with it.
Note: Thisdoesn'tbringanexistingM300mainwindowtoview.ThiscreatesoropensanewM300session.
Only the first session of the M300 software allows the user to do Acquisition mode.
All other sessions of the M300 must be either in be Playback or UDP mode.
The maximum number of M300 sessions at one time is 26. The M300 uses the letters a to z, to
differentiate between sessions.
BRINGTOVIEWANEXISTINGM300SESSION
When you go to the Photon task bar you can see all the sessions that are running and the display
windows for each of the sessions. When you click on the M300 button in the Photon task bar you
are bringing into view a particular M300 main window.
Note: Thisdoesn’tstartanewsessionoftheM300.ThisbringsanexistingM300mainwindowtoview.