Operating instructions

SEA M300USERSGUIDE
MAINWINDOW  76
directory. This allows the project and picture files to be separate.
If you use ‘/’ in the name, this implies a directory off the root directory.
The default is pic.
GENERALTAB
PortName
This is the name of the UDP port to be used. This is from the /etc/services file (near end of file).
The port will be used to read data if in UDP mode.
The port will be used to write data if the system is in acquisition or playback mode and the broadcast
button is clicked.
BroadcastAddress
This is the IP address for broadcast.
Delay
Delay value in micro seconds to wait if doing a broadcast in playback mode. This is for playback
only, it has no effect in acquisition mode.
During playback, if the user is broadcasting network data, the playback can run really fast. When too
many data packets are broadcast fast, it will increase the chance of lost data packets. If you increase or
change the value this will affect the data loss rate.