Operating instructions

M300USERSGUIDE SEA
MAINWINDOW  73
M300FILEPROPERTIESDIALOG
The M300 file properties dialogs has sections for files, general and print settings.
FILESTAB
Automaticallyturnrecordon/offforASCIItextfileswithrecordbutton
This option allows the user control over the ASCII record state based on the M300 record state.
Saveprojectsetuptablesatstartofrawbinaryfile
Typically the user will have this option check to save the M300 project files at the start of the M300
binary file.
Note: Thisallowsgett ing theM300projectfilesfromtherawdatawiththeSeaTool.SeetheSEAQNX4
UtilitiesintheSEAPhotonUtilitiessection,SeaTool.http://www.scieng.com/pdf/SeaUtils.pdf
This allows getting the M300 project files from the raw data with the SeaTool.
On occasion this can be turned off, if the user wants to create a file without the M300 projects.
Showallfilesopenwarnings
This is a debug option which must be turned off for most of the time. If necessary SEA will instruct
to turn on this option for debug feature with project files related issues.
Sync