Operating instructions

M300USERSGUIDE SEA
MAINWINDOW  69
FileProgressBar
Displays how far along the file pointer is (in percentage).
When the user rewinds, goes to end of file, uses scroll bar to change the position, this will also change
the file progress bar.
WINDOWTAB
The window tab is the main focal point to control data display management operations. The user can
create a new display or delete an existing display from this tab.
NewWindow
Brings up the create new window dialog. The gives the user the means to create a new window.
DeleteWindow
Deletes the current window selected by the drop down menu. When you delete a window, it is
permanently deleted from a project and cannot be recovered as it gets deleted from the main window
list.
There is no undo feature in the M300, so the user can get around this by exiting the M300 and not
saving the project. When the M300 is restarted the original project settings will be as before,
unchanged.
The corresponding *.wnd file is not deleted and thus can be added after deletion only by editing the
wnd.300 (main window configuration file) file and adding the deleted entry back into this file. See
the M300 Reference Guide for more information regarding the formats of these files.
If the window is not going to be used again, the user must manually remove the corresponding
window file to avoid confusion.
Previous/Next
Cycles to the previous or next window respectively.