Operating instructions

M300USERSGUIDE SEA
MAINWINDOW  65
This is valid only for acquisition and UDP modes.
Broadcast
The total column displays how much data is being broadcast to other systems. This is followed by the
broadcast rate.
The broadcast state is off (red) or on (green). This indicates whether the broadcast is on or not.
The current time in ms that the M300 broadcast (m300b) is using, followed by the average time and
maximum time.
The last column shows any error from the M300 broadcast. It should be zero. Any errors here and
the user needs to investigate the cause of the broadcast errors.
This is valid only when broadcast toggle is depressed, while broadcasting data.
WriteTo
This field holds the path and filename of the file being written to when the record button is selected.
This is used for acquisition and UDP modes.
ReadFrom
Displays the path and filename of the file being read from during playback.
This is used for playback mode.
ACQUISITIONTAB
The acquisition tab displays information pertinent to acquisition mode for the most part. During
playback and UDP modes, the acquisition tab displays only frequency information.