Operating instructions
M300USERSGUIDE SEA
MAINWINDOW
59
Selects the previous window in the window list.
Next
1. In the Window menu, select Next (Shortcut: Alt+W, E).
Selects the next window in the window list.
History
Separated by a line across the menu area, this area of the menu stores the most recently referenced
windows.
To select a particular window in the history list, simply click on it.
The number of windows on the history are defined in (See “History Count, File, Project, Window,
Command” on page 77).
HELPMENU
AbouttheModel300
1. In the Help menu, select About Model 300 (Shortcut: Alt+H, A).
This will display the about dialog. This dialog contains the current M300 version (including date of
compile), the registered client, the system serial number.
TOOLBAR
Acquisition(ACQ)
The user can select the source of the data for the M300 system to use. These are mutually exclusive
per M300 session. It’s not possible to have the same M300 window use Acquisition and Playback
simultaneously.
When running multiple sessions/instances of the M300 system, only the first one is allowed in
Acquisition mode.
This will put the M300 into acquisition mode which will then enable the user to acquire, record,
display real-time data from board/acquisition sources.
The M300 must record data for the user to be able to playback the data.
Playback(PB)
This will playback M300 or M200 binary files. ASCII files CANNOT be used for playback.
Typically a user will select playback and then open a file associated with the current project to
playback data taken from a previous time. These files are raw, binary ‘*.sea’ files.