Operating instructions

M300USERSGUIDE SEA
MAINWINDOW  53
MAINWINDOWANDPROPERTIES
The M300 main interface window is the primary launch point of all M300 operations. Both
Acquisition and Playback as well as UDP can be performed now from a single window. The M300
data displays can be directly managed from this window as well as formulas and almost all project
settings.
M300MAINWINDOW
The M300 window has been revised several times and this process will continue for as long as
changes are desired.
We will describe the M300 window feature/items from top to bottom, left to right.
If you are not quite sure which buttons are which, bring the mouse to hoover over the desired
button, while running M300 and you will get a pop text with more information.
TITLEBAR
M300
The title bar display the application name M300. The “:” separates the M300 and data source.
DataSource
The current data source is displayed in the title bar, following the M300 name. Currently the
possible valid data sources are “Acquisition”, “PlayBack”, “UDP”. If you look at the M300 title bar,
you can tell which mode you are using.