Operating instructions

M300USERSGUIDE SEA
GETTINGSTARTED  31
area, you will only get the internal part of the window, without the title bar area of the window.
SEATAB
This is where you will find the program icons for any SEA software, including the M300.
EXITINGPHOTON
You can exit Photon using a couple of different commands.
1. Click on the QNX logo in the bottom left corner of the screen, and select Shutdown.
2. Don’t use the CTL + ALT + SHIFT + BACKSPACE key combination to shutdown photon.
Note: Wehadtodisablethisoptionon SEAM300installedsy stems.Thekeycombinationexitisnotthe
sameasmouseexitontheQNXbutton.Asaresultapplicationsdon’tgetshutdownthewaytheyshouldand
causeproblemswithbadvaluesonfiles,etc.
Note: OnceyouexitPhoton,youwill
returntotheQNX4commandpromptortothePhotonloginscreenif
yoursystemisconfiguredtostartPhotonautomatically.
GETTINGHELPFORQNX4ANDPHOTON
The QNX 4 system does not provide man pages like in traditional UNIX systems. To get help on a
command, type use cmd where ‘cmd’. . is the command in question. For example, for help with the
‘ls’ command, type use ls at the command prompt from a ‘pterm' window). Help is also available
using the Helpviewer Photon application. To get help on any QNX 4, TCP/IP 5 and Photon 1.14
issues consult the Helpviewer using one of the following methods.
1. In the Desktop Manager, select the Applications tab in the application groups panel. Click on
the Helpviewer icon.
2. From a QNX shell, type
helpviewer.