Operating instructions
SEA M300USERSGUIDE
GETTINGSTARTED
24
#/usr/ucb/route add 225.0.0.0 192.9.200.2
/usr/ucb/route add default 192.9.200.40
# /usr/bin/syslogd
# Note: to act as an NFS server, uncomment the next line
# /etc/nfsstart
# Note: to act as a TCP/IP server, uncomment the next line
/usr/ucb/inetd &
/etc/services
This is the end of the /etc/services file where we typically make the modifications for the M300
systems.
#
# QNX services
#
phrelay 4868/tcp
#
# SEA
#
sea-udp 2000/udp
radar-udp 2001/udp
sea-tunnel 2005/tcp
sea-tunnel 2005/udp
#
# WCM-2000
#
wcm-primary 2100/tcp
wcm-primary 2100/udp
wcm-secondary 2101/tcp
wcm-secondary 2101/udp
wcm-tertiary 2102/tcp
wcm-tertiary 2102/udp
wcm-quaternary 2103/tcp
wcm-quaternary 2103/udp
wcm-input 2110/tcp
wcm-input 2110/udp
nrc-data 4010/udp
nrc-data 4010/tcp
msc-pass3 4011/udp
wmo-radio 4012/udp
msc-radaralt 4015/udp
msc-radaralt 4015/tcp
#
# Palas
#