Operating instructions

M300USERSGUIDE SEA
DATADISPLAYS  177
2DMONOIMAGE(2DM.300)
ParticleColor
This number determines which color the Particle image will be displayed in.
TimebarEnable
This option toggles the timebar option which draws horizontal lines illustrating the time slices.
Scale
This is the scaling factor. A Factor of 1 will display the image as it was recorded. Selecting a scaling
factor higher than 1 will magnify the image by that factor.
AgeLimit
This is the limit, assigned by the user, the M300 will use to determine if an image should be
indicated as “old”. For example, if a user inputs an age limit of 10, the M300 will continue to work
as normal. However, if the currently displayed 2D Mono Image becomes 10 minutes old relative to
the M300 system buffer during playback, the M300 will then place hash lines across the image to
indicate to the user that it has gone past its age limit.
2DMono‐scalingthedisplay
1. In the 2D Mono display window you are scaling, click on the Scale drop down menu.
2. Select the scaling value needed by either selecting a value from the drop down menu, or typing in
the number directly. For the most part, the user will not need to scale the display above 5x.
2DMono‐changingtheacquisitionaddress
1. In the 2D Mono display window you are changing the I/O address, click on the Acquisition
Address drop down menu.
2. Select the address needed by selecting a value from the drop down menu.
2DMono‐adjustingtheagelimit
1. In the 2D Mono display window you are changing the I/O address, click on the Age Limit text
box.
2. Type the value of the age limit desired (in minutes) and hit Enter. At this point the M300 will
display hash lines across any images that are older than this value.