Operating instructions

SEA M300USERSGUIDE
DATADISPLAYS  172
RGBValue
Displays, in numerical form, the Red, Green, and Blue components of the currently selected color.
Each component can be in the range 0-255 for a total of 16 million colors, depending on the
capabilities of the currently installed video adapter. The user can change these values by directly
overwriting the number currently displayed.
RGBScaleAdjust
Equivalent display to the RGB Values in numerical form, but along a slider instead. Dragging these
sliders will change both the color and the numerical RGB value associated with it.
ColorSwatches
These are pre-selected colors for quick selection by the users. They are spread over the entire RGB
spectrum.
Cancel
This allows the user to cancel any changes since Apply or Done was clicked.
Apply
Applies the changes made, but keeps the dialog open.
Done
Applies the changes made, and closes the dialog window.
1. On the display you wish to alter, click on the appropriate color button. Some displays have more
than one; therefore you should refer to the appropriate display description if you are not sure
which color button you need to click on.
2. Set the color you wish to use.
3. Once the color has been selected click the Done (Shortcut: D) Button in the Properties Dialog. If
you wish to apply the changes without closing the window, you may click on Apply. (Shortcut:
A). You may cancel the operation at any time by clicking on Cancel.