Operating instructions

M300USERSGUIDE SEA
DATADISPLAYS  171
There are times where it’s desirable to lock some features of the M300 from being able to be
modified.
For example to lock all the displays inside of a text window, the user can select the raw lock flag.
By default all lock flags are off when a window is created. The user must select the desired locks.
Done
Saves the applies the changes and closes the dialog.
Apply
Saves and applies the changes made
Load
Loads in the current window properties. (If Apply was never clicked, these would be the original
settings before the dialog was open.)
Cancel
Cancels all changes since Apply or Done was clicked and closes the dialog window.
1. On the display you wish to alter, click on the Properties Button in the display control group at
the top of the display.
2. Set the appropriate options in the Properties Dialog according to their descriptions above.
3. Once all options have been selected click on the Done (Shortcut: D) Button in the Properties
Dialog. If you wish to apply the changes without closing the window, you may click on Apply.
(Shortcut: A). You may cancel the operation at any time by clicking on Cancel.
CHANGINGADISPLAYCOLOR
CurrentColor
Currently selected color.