Operating instructions

SEA M300USERSGUIDE
DATADISPLAYS  170
Frequency
The trigger frequency. Most windows use ‘Ignore’.
Formula
The formula to trigger on. Most windows don’t use a formula (blank entry).
Board
The name of the board for the trigger. Most windows use ‘None’ for the board.
FLAGSTAB
RenderFlags
Window flags allows the user to customize the look and features desired for each window.
Most of the flag names are self explanatory. For example, title will give you the title bar for the
window. Sometimes after the project is all setup, the user might decide that it’s best not to have a
tittle bar in a window and use that space instead for extra display.
The front most flag, sets the window to be always in front of other windows. Typically, this can be
used for a window (on top/bottom/side area of the display), so that the information displayed in this
window is always visible.
The console switch flag allows the window to switch a new console. Typically most windows don’t
have this flag set. Occasionally a few windows might have this set, so the information displayed on
that window is always present.
LockFlags
The lock flags specify all the different aspects of the M300 displays that can be locked by the user
while the M300 is running.