Operating instructions
SEA M300USERSGUIDE
DATADISPLAYS
162
WINDOWDISPLAYS
The data displays in the M300 are used to convey acquired data in immediate, understandable form.
The most commonly used displays are probe image display, strip charts, histograms, maps, text and x
vs. y.
The Photon GUI interface of the M300 allows the user to have as many data display windows as they
wish.
The windows can be spread out throughout the Photon GUI work space, allow for a very large
display area. The user can easily switch between display consoles.
Photon has nine virtual consoles total. Only one console is visible at a time.
M300 systems can be configured with multiple video cards allowing for a large number of separate
displays.
NEWWINDOWDIALOG
This gives the user the means to create a new window. Windows can also be created manually by
adding them to the wnd.300 project file. The corresponding ‘*.wnd’ must also be added (which can
be copied from an existing project).
The user must create a window before they can display on it.
Type
The user can pick the window type. As you can see from the dialog above, the M300 supports several
different types of windows.