Operating instructions

M300USERSGUIDE SEA
SETUP  143
GPIBPCIIBOARD
Address
(See “Address” on page 103).
State
(See “State” on page 103).
PB/UDP
(See “PB/UDP” on page 104).
DeviceAddress
Address of the instrument on the GPIB bus.
CommandFile
Contains the filename that of the command file which contains the sequence of commands to be sent
to the GPIB PCII board.
CaptureFile
Contains the name of the capture file used to store all the information the GPIB hardware sends back
to the M300.
LogFile
Contains the name of the log file used to log all I/O with the GPIB hardware.
Done
(See “Done” on page 104).
Default
(See “Default” on page 104).
Cancel
(See “Cancel” on page 104).