Operating instructions

M300USERSGUIDE SEA
SETUP  127
CAMAC1DBOARD
Address
(See “Address” on page 103).
State
(See “State” on page 103).
PB/UDP
(See “PB/UDP” on page 104).
Slot
CAMAC slot where the board is installed.
Command
For FSSP type, this value sets the initial range [0, 1, 2 and 3].
For PCASP, this value sets the initial pump state (0=off, 1=on).
Done
(See “Done” on page 104).
Default
(See “Default” on page 104).
Cancel
(See “Cancel” on page 104).