Operating instructions

SEA M300USERSGUIDE
SETUP  122
2DMONOBOARD
Address
(See “Address” on page 103).
State
(See “State” on page 103).
PB/UDP
(See “PB/UDP” on page 104).
DMA
(See “DMA” on page 104).
BitShift
Controls how fast the image data is transferred from the probe. The length and quality of the
interface cable are limiting factors on the maximum bit shift possible. The higher the bit shift the
more data we can transfer from the probe.
Type
Controls which type of acquisition hardware is being used. The 2D Mono board supports both 2D
Mono and HVPS particle measurement probes.
Done
(See “Done” on page 104).
Default
(See “Default” on page 104).
Cancel
(See “Cancel” on page 104).