Operating instructions

M300USERSGUIDE SEA
SETUP  105
BOARDSETUP
1. In the Setup menu, select Board. (Shortcut: Alt + S, B)
All the M300 functionally as far as acquiring real time data goes through boards. The boards are the
basic entity that is present in the system.
Each board type dictates the possible acquisition sources for data. So, off each board we have the
acquisition events.
Home
Moves the selected board to the top of the list.
End
Moves the selected board to the bottom of the list.
Up
Moves the selected board up the list by one.
Down
Moves the selected board down the list by one.
BoardTree
At the head of the tree is the project name. All the boards present in the project are part of the tree.
To insert a new board, you must first click on the project name which will enable the insert button.
You must also provide a board name, number and the type of the board.
If you wish to modify board settings, you must first click on the board. Then you can click on the