Operating instructions

SEA M300USERSGUIDE
SETUP  104
This is used for acquisition mode.
PB/UDP
Controls whether or not the board will be used during playback and broadcast.
DataBits
Data bits used in the serial protocol interface. Check information for instrument for the right
settings.
StopBits
Stop bits used in the serial protocol interface. Check information for instrument for the right
settings.
Baud
Baud rate used in the serial protocol interface. Check information for instrument for the right
settings.
Parity
Parity used in the serial protocol interface. Check information for instrument for the right settings.
DMA
The DMA channel for imaging cards. Using DMA for the image transfer frees up the CPU board.
The DMA channels available are 5, 6 and 7. Each DMA board cannot be used by more than one
card.
Done
Applies changes and closes the dialog window.
Default
Default values are used for all items in the dialog.
Cancel
Exit the dialog without making changes.