Operating instructions
M300USERSGUIDE SEA
WELCOME
9
• Capability to write to binary file while playing back data.
• Capability to playback data from an open growing file on another system over the network connection.
• 10kHz System Frequency Ceiling.
• Individual computations and displays can be scheduled at different frequencies.
• ASCII file output backward compatibility with M200 with scheduling capability added.
• Built in system status/health information available for acquisition mode.
• Support for most of the existing M200 functions. Of course, new ones have been added as necessary.
• Support for all M200 mathematical functions as well as new ones.
• Support for double, float, signed/unsigned long, signed/unsigned integer, signed/unsigned char and string
data types.
• All M300 windows have date and time information.
• All M300 windows have pause, grid toggle and print/capture buttons.
• Technically unlimited Strip Charts and X vs. Y plots per window.
• Enhanced capability to print/capture any M300 window.
• Data acquisition playback support via same software package.
• Can be configured to support more and more instruments with the corresponding displays.
• Support for analog input, digital input, 1D probes, 2D probes, 2D Grey Probes, GPS, LORAN, ARINC
serial, INS synchros, Hail spectrometer, serial ASCII data, serial IEEE data, serial integer data, Sonic wind
System, INS Accelerometer, Falcon data, HVPS probes, VAX clock, PMS 1058B 1D data, BC620AT time,
DRV11 data, Ballard 708, AIMMS data, POSAV data, Network data and Pressure Multiplexer events.
• Storage to hard drive file.
• Control functions for digital output, analog output, 2D Mono TAS clock, 2D Grey clock, VAX time clock,
INS INI and JW interlock.
• Probe channel tables.
• Output data to printer ports.
• Network data output to other systems.
• Telemetric data output.
• Storage of all configuration tables with raw data.
SYSTEMREQUIREMENTS
The following items are necessary as a minimum operating environment for the Model 300 Data
Acquisition System.