Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Connect Tech Inc. 42 Arrow Road Guelph, Ontario N1K 1S6 Tel: Toll: Fax: Email: Web: 519-836-1291 800-426-8979 (North America only) 519-836-4878 sales@connecttech.com support@connecttech.com www.connecttech.com CTIM-00029 Revision 0.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Limited Lifetime Warranty Connect Tech Inc. provides a lifetime warranty for all of our products. Should this product, in Connect Tech Inc.’s opinion, fail to be in good working order during the warranty period, Connect Tech Inc. will, at our option, repair or replace this product at no charge, provided that the product has not been subjected to abuse, misuse, accident, disaster or non Connect Tech Inc.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Table of Contents Limited Lifetime Warranty ............................................................................................................................................... 2 Copyright Notice............................................................................................................................................................... 2 Trademark Acknowledgment .........................................
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual RS423 Wiring Example ....................................................................................................................... 29 RS-422/485 Wiring Examples .............................................................................................................. 30 Software Installation ...............................................................................................................................
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Customer Support Overview If you experience difficulties after reading the manual and/or using the product, contact the Connect Tech Inc. reseller from which you purchased the product. In most cases the reseller can help you with product installation and difficulties. In the event that the reseller is unable to resolve your problem, our highly qualified support staff can assist you.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Introduction Connect Tech's Xtreme/104-Plus, 104-PCI and 104/Express family combines the best of the Universal PCI bus with the rugged and compact form factor of PC/104. The various models are PCI 2.0, PC/104-Plus 2.0 or PCIe/104 compliant. The modular Xtreme/104-Plus and Xtreme/104-Plus Opto cards include a PC/104 pass-through connector option for compatibility with legacy PC/104 cards.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Xtreme/104-Plus Opto Universal PC/104-Plus adapter PCI 2.0 and PC/104-Plus compliant 2 or 4 ports jumper selectable for RS-232/422/485 Supports full duplex, half duplex and multi-drop communication modes in RS-422/485 Maximum data rates of 921.6 Kbps (RS-232) and 1.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Xtreme/PCI-104 12 Port Opto PCI-104 Version 1.0 compliant Highest port density isolated serial board on the market! 12 ports with jumper selectable for RS-232/422/485 Supports full duplex, half duplex and multi-drop communication modes in RS-422/485 Maximum data rates of 921.6 Kbps (RS-232) and 2.06Mbps (RS-422/485) with 16x baud clock.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Xtreme/104-Plus Diagrams Figure 1: Xtreme/104-Plus RS-232/422/485 Model Hardware Components Revision 0.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Figure 2: Xtreme/104-Plus RS-423 Model Hardware Components 10 Revision 0.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Figure 3: Xtreme/104-Plus RS-232/422/485/TTL Models Revision 0.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Note: Configuration information for the RS-232/422/485/TTL model, including jumper settings and pinouts, is located in Electrical Interfaces (RS-232/422/485/TTL models). Figure 4: Xtreme/104-Plus Opto RS-232/422/485 Hardware Components (4 Port Model) 12 Revision 0.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Xtreme/104 Express Diagrams Port I/O connectors 2x5 R/A headers Line Interface selection jumpers J19 J17 J14 J15 J16 J13 J9 J4 J10 Ports 1-4 J11 J12 RS485 control jumpers P5 P4 J3 J5 P6 P3 J2 J6 P7 P2 J1 J7 P8 Ports 5-8 J8 P1 P10 PCI/104 Express Connector Figure 5: Xtreme/104-Express Opto Hardware Components Revision 0.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Xtreme/PCI104 12 Port Opto Diagrams Port 12 Port 1 J12.1 J12.2 J1.2 J1.1 J11.1 J12.2 J2.2 J10.1 J10.2 J3.2 J2.1 J3.1 J9.1 J8.1 J4.1 J9.2 J4.2 J8.2 J5.2 J5.1 Port 7 Port 6 J7.2 J6.2 G-485 P-9-12 P-5-8 P-1-4 J7.1 FE DCB A AB J6.1 AB C D E F AB Figure 6: Xtreme/PCI104-Opto Hardware Components 14 Revision 0.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Xtreme/104 Installation Overview Before you begin, take a moment to ensure your package includes the components shipped with your product. These components should include: One Xtreme/104 adapter One CD containing software and documentation DB-9 male fan-out cable or DB9 male cables (optional) If any of these components are missing, contact Connect Tech (see more Contact Details) or your reseller.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Xtreme/104 Plus and Xtreme/PCI-104 ID Selection Up to four Xtreme/104-Plus boards can reside within a single PC/104-Plus module stack. Each card within the stack must have a unique ID ranging from zero to three.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Electrical Interfaces Xtreme/104 Plus and Express (RS232/422/485 and RS-423 Models) RS-232 Electrical Interface This is the default setting for the interface selectable Xtreme/104-Plus and Xtreme/104-Plus Opto. To operate a port in RS-232 mode, no jumpers are set on the corresponding jumper block.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Jumper Block Settings The following jumper block diagram depicts typical settings on a four-port selectable Xtreme/104-Plus or Xtreme/104-Plus Opto. Jumper blocks JA, JB, JC and JD control ports 1 through 4, respectively. The Xtreme/104 Express can have 4 or 8 ports which are controlled by J1 though J4, and J1 though J8 respectively.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual JA = Port 1, JB = Port 3, JC = Port 5, JD = Port 7 JE = Port 2, JF = Port 4, JG = Port 6, JH = Port 8. Note: this does not apply to Xtreme/104 Express models Half Duplex and Multi-drop Slave modes require you to select the appropriate mode via software. Please refer to the readme.txt files found in the appropriate directories on the Xtreme/104-Plus/Express CD.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Electrical Interfaces (RS-232/422/485/TTL Models) RS-232/TTL Electrical Interface The following control signals are available to ports configured for RS-232 and TTL mode: TxD, RxD, RTS, CTS, RI, DTR, DSR, DCD, SG (Signal Ground) and +5V. See Figure 3 for the location of Px1 RS-232/TTL port headers. See Figure 13 for information on configuring ports for RS-232 or TTL mode.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Electrical Interfaces Xtreme/PCI-104 12 Port Opto I/O Port Power for the Xtreme/PCI-104 Opto 12 Port Jumpers J2A, J2B and J2C provide the ability to power on or off the I/O section of a port in groups of four. Removing the jumpers will remove power from the DC-DC converter and all components in the isolated section of the product. This mode can be used in cases where power is in short supply and the group of ports is unused.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Line Bias/Termination The RS-422/485 transceivers, both transmit and receive are optionally biased and terminated to produce a stable idle condition through jumper selectable resistors. Jumper Block and Mode Settings for 12 Port Opto The following jumper block diagram depicts typical settings on a four-port selectable Xtreme/PCI-104 12 Port Opto. Each port has two banks of jumper blocks, Jx.1y and Jx.2y.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual For 2-wire networks only the Jx.2A/Jx.2B jumpers should be installed. The Jx.1E/Jx.1F jumpers are not used and will have no effect. Line Interface Mode Jumpers for Xtreme/PCI-104 Opto 12 Port The Line Interface Mode Jumpers function is as follows: Mode / Jumpers Jx..1A Jx..1B Jx..
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Connectors/Pinouts Xtreme/104 Plus Figure 12: 40 Pin Connector: Pin Numbering Table 1: I/O Signal Assignments for RS-423 Models Header Port Number 1 2 3 4 Header Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 RS-423 Direction RxD+ CTSRxDRTSRef (RTS+) TxDRef (TxD+) CTS+ TxDRTSGND N/C RxD+ CTSRxDRTSRef (RTS+) TxDRef (TxD+) CTS+ TxDRTSGND N/C RxD+ CTSR
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Table 2: I/O Signal Assignments for RS-232/422/485 Models (See Figure 1 for Port Numbering) Header Port No. (4 port models) Header Port No. (8 port models) Pin No.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Xtreme/104 Plus Opto 4&8 Port Table 3: 10 Pin R/A Port Header Pinouts on Opto Models Pin No. 1 2 3 4 5 6 7 8 9 10 RS-232 NC NC RxD RTS TxD CTS NC NC isolated gnd. N/A Direction NC NC input output output input NC NC signal gnd. N/A Direction RxD (+) CTS (-) RxD (-) RTS (+) TxD (+) CTS (+) TxD (-) RTS (-) isolated gnd.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Xtreme/PCI-104 12 Port Opto Table 5: 10 Pin R/A Port Header Pinouts on 12 Port Opto Models Pin No.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual Xtreme/104 Plus RS232/485/TTL model Table 7: RS-232/TTL Px1 Right Angled Header Pinouts (CAG104 Compatible) (See Figure 3 for port numbering and locations) Pin # 1 2 3 4 5 6 7 8 9 10 RS-232/TTL Signal DCD DSR RxD RTS TxD CTS DTR RI SG +5V Direction Input Input Input Output Output Input Output Input Signal Ground supply to external devices Note: Total current drawn on +5V pins of all ports must not exceed 1A.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Wiring Examples RS232 Wiring Example Xtreme/104 RS232 Device TxD RxD GND CTS RTS RxD TxD GND RTS CTS Figure 13: RS-232 Wiring Diagram RS423 Wiring Example Xtreme/104 TxDRef GND RxDRxD+ RS232 Device TxDTxD Ref GND RXDRxD+ RxDRxD+ GND TxDRef Figure 14: RS-423 Wiring Diagram Revision 0.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual RS-422/485 Wiring Examples Note: The RS-422/485 electrical interface consists of a differential signaling scheme. You should always connect the signals with twisted pairs. The Signal Reference (GND) must be connected.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Software Installation Xtreme/104-Plus, Xtreme/104 Express and Xtreme/PCI-104 products include support for the following operating systems: Windows NT/2000/Server /XP/Vista/Seven Windows CE (Not all models supported, contact support for most recent product support) Windows XPe (Not all models supported, contact support for most recent product support) QNX 4 QNX 6 Linux Please refer to the readme.
Connect Tech Xtreme/104-Plus, PCI-104 and PCI/104 Express Family User Manual PC/104 Bus Interface 3.3V or 5V PC/104-Plus or PCI-104 PCIe/104 Bus Interface PCIe/104 Express interface. Or PCI/104 Express interface when PCI/104 stack through is not required. PCI-104 The Xtreme/PCI-104 12 Port Opto requires a 5V PCI Power, but is compatible with 3.3V and 5V PCI signalling. Dimensions PC/104-Plus or PCIe/104 or PCI/104 Express compliant.
Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual Certification The Xtreme/104-Plus and Express product families are to be included into a device ultimately subject to FCC, DOC/IC, and CE certification. The customer is responsible for bringing the completed device into compliance prior to resale. Connect Tech Inc.
