Specifications

Pneumatic Tie Rod Cylinders
Series VE
Parker Hannifin Corporation
Cylinder Division
Des Plaines, Illinois USA
www.parker.com/cylinder
5
Catalog HY08-0948-3/NA
How To Order
How to Order Series VE Air Cylinders for Valve Actuation
How to Order Code
Shaded boxes identify required model number fields.
1
Lipseal Piston is Standard for all piston options.
The following lists standard tube and optional tube materials by bore diameter range with available piston codes:
L-SteelTubeisStandardfor2.00"-8.00"bore(NonMagneticPiston);Optionalatextracost10.00"-24.00" 
P-CompositeTubeisOptionalfor3.25"-8.00"(NonMagneticPiston);Standard10.00"-24.00"
A-AluminumTubeisStandardfor2.00"-8.00"(MagneticPiston);notavailable10.00"-24.00"
3-CompositeTubeisOptionalfor3.25"-8.00"(MagneticPiston);Standard10.00"-24.00"
2
If stop tube is required, please provide gross stroke length (gross stroke = stop tube + net stroke).
3
JBMountisavailableinborediameters7.00"through20.00"only.
4
Style#3RodEndisdeemeda“special”.Whenordering,pleasesupplyKK,AandWDimensions.
5
Class 5 Seals are limited to bore diameters up to 14.00".
6
Composite tubing is not to be exposed to fluids which have a pH level lower than 3 or higher than 11.
Available Special Options
• Stainless Steel Piston Rods
• SpringExtendorRetract
• DoubleRodEndStyle
• HighTemperatureSeals
• WaterService–consultfactoryforapplicationsabove100°F(38°C)
• LiftingEyes(weldedoncapface)
• StrokeAdjuster(infrequent)
• TieRodsExtendedHeadandCap(ConsultFactory)
• LowTemperatureNitrileSeals
5.00
Bore
Dia.
Specify
bore
dia. in
inches:
2.00
2.50
3.25
4.00
5.00
6.00
7.00
8.00
10.00
12.00
14.00
16.00
18.00
20.00
22.00
24.00
E 24.000K TB VE VL U S A1 9
Use"K"for
Double rod
cylinders
only. Leave
blank if not
required
Double
Rod
SpecifyMountingStyle
TB (Tie Rods
Ext.Head)
JB
3
(Head Square
FlangeMounting)
Mounting
Style
SpecifyEfor
cap welded
lifting eye.
(only if
required)
Mounting
Modifi-
cation
Series
VE
L=NonMagnetic
Piston, Steel Tube
P
6
=NonMagnetic
Piston, Composite
Tube
A=MagneticPiston,
Aluminum Tube
3
6
=MagneticPiston,
Composite Tube
Piston
1
Ports
U = NPT
Ports (Dry
Seal Type)
If Required
Specify
V
5
=
Fluorocarbon
Seals
4 = Low Temp
Seals
Common
Modifi-
cations
Use only if special
modifications are
required:
Port Position
Change
Special Seals
Stop Tube
2
Stroke Adjusters
Special
Modifi-
cations
Specify
Rod
Number 1
Piston
Rod
Number
Select:
Style 9 Female
Style 8
IntermediateMale
Style4SmallMale
Style 3
4
(Special)
Piston
RodEnd
Piston
Rod
Thread
A = UNF
Stroke
2
Specify
in
inches.