User`s manual

Connect Tech Xtreme/104-Plus User’s Manual
Revision 0.04
11
3. Software/driver installation
Load the appropriate driver for your Operating System, as found on the accompanying
CD. Installation guides are also available on the CD to aid you in this process.
Hardware Installation
Installing Xtreme/104-Plus cards into your system
Turn off the power to your computer and open it to expose the expansion slots (consult your
system’s documentation for more information on this procedure).
Choose an available position in the PC/104-Plus stack, and set the ID jumpers or rotary switch
accordingly (see ID Selection). Insert the Xtreme/104-Plus adapter and re-assemble the stack.
Hardware Configuration
Interrupts and Memory Address Selection
Xtreme/104-Plus boards are PCI cards, so the host computer’s BIOS will automatically set
interrupts and memory addresses when you reboot after installation.