User manual

Connect Tech Xtreme/104 Plus, PCI-104 and PCI/104 Express Family User Manual
Revision 0.11
31
20 Driver Software Configuration
20.1 Driver Installation
Xtreme/104-Plus, Xtreme/104 Express and Xtreme/PCI-104 products include support for the
following operating systems:
 Windows NT/2000/Server /XP/Vista/Seven
 Windows CE (Not all models supported, contact support for most recent product
support)
 Windows XPe (Not all models supported, contact support for most recent product
support)
 QNX 4
 QNX 6
 Linux
Please refer to the readme.txt files found in the appropriate directories on the Xtreme/104-Plus
CD containing drivers and documentation. These files contain technical tips or release notes
concerning installation and configuration of the device driver. For further information
concerning software installation of Xtreme/104 products please visit the Connect Tech website
at www.connecttech.com/
If you are interested in a device driver for an operating system not listed please contact the
Connect Tech Sales Department. Also, visit the Download Zone of the Support Center on the
Connect Tech website for the latest product manuals, installation guides, diagnostic utilities and
device driver software
20.2 RS-485 Multidrop 2 and 4 wire configuration
Each operating system will feature a different means to setup the RS485 multidrop modes.
Windows - These modes are setup in Control Panel – System – Hardware – Device Manager – Ports – CTI
PCI UART. Click on Advanced under Port Settings after the driver is installed.
QNX4/QNX6 – These modes are setup using the Connect Tech ctty utility. Type “use ctty” for
instructions.
Linux – These modes are setup using the Connect Tech set485 utility. See the Linux driver
readme.dat for usage details.