User manual

Connect Tech FreeForm/PCI-104 User Manual
Revision 0.07 31
4) Provide a name and location for the output mcs file, the click OK.
5) Click OK when prompted to add a new device
6) Browse to the reference design directory, and select the bitstream (.bit)
Example: {REFDIR}\fpga\\ise_projects\ref_design_fcg001rd\ref_design.bit
7) When asked to add another device, click no, then click ok to complete the setup.
8) Under iMPACT processes, ‘click generate file’. This will produce 3 files:
\fpga\\ise_projects\ref_design_fcg001rd\ref_design_fcg001rd.mcs
\fpga\\ise_projects\ref_design_fcg001rd\ref_design_fcg001rd.prm
\fpga\\ise_projects\ref_design_fcg001rd\ref_design_fcg001rd.cfi