User manual

Connect Tech FreeForm/PCI-104 User Manual
Revision 0.07 23
5) When prompted with the following messages, click OK and Cancel
6) Right click on the FPGA, and click ‘Assign new Configuration File’
7) Browse to the reference design directory, and select the bitstream (.bit)
Example: {REFDIR}\fpga\\ise_projects\ref_design_fcg001rd\ref_design.bit
8) A prompt will ask if you wish to attach a SPI file or BPI Prom. Click Yes.
9) Browse to the reference design directory, and select the prom bile (.mcs)
Example: {REFDIR}\fpga\\ise_projects\ref_design_fcg001rd\ ref_design_fcg001rd.mcs
10) A prompt will ask to select the attached SPI. Choose M25P32 and click ok
Note: Select “M25P16” (16 Mb flash) if using a FCG00x Rev B, FCG00x Rev C, or a FCG00x Rev D. with assembly
Date 09/2009). To identify the flash size, refer to Appendix D: Identifying Configuration Flash Size