User`s guide

Installation
OMG-ISO-COMM Page 8
Installation
Operating System Installation
For Windows Users
Start by choosing Install Software at the beginning of the CD. Choose
Asynchronous COM: Port Software, SeaCOM.
Other Operating Systems
Refer to the appropriate section of the Serial Utilities Software.
System Installation
The OMG-ISO-COMM can be installed in any of the PC expansion slots, but to
access the ‘AT’ or (E)ISA IRQs (10, 11, 12, 15) the adapter must be installed in
one of the 16 bit slots. The OMG-ISO-COMM contains several jumper straps for
each port which must be set for proper operation prior to installing the card into
the computer.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available slot and remove the blank metal slot cover.
4. Gently insert the OMG-ISO-COMM into the slot. Make sure that the adapter
is seated properly.
5. Replace the screw.
6. Install the twin DB-9 (ports 3 and 4) Cable
7. Replace the cover.
8. Connect the power cord.
Installation is complete.