User guide

MultiModem ZPX User Guide 29

Instructions for Disposal of WEEE by Users in the European Union

The symbol shown below is on the product or on its packaging, which indicates that this product must not

be disposed of with other waste. Instead, itis the user’s responsibility to dispose of their waste equipment

by handing it over to a designated collection point for the recycling of waste electrical and electronic

equipment. The separate collection and recycling of your waste equipment at the time of disposal will

help to conserve natural resources and ensure that it is recycled in a manner that protects human health

and the environment. For more information about where you can drop off your waste equipment for recy-

cling, please contact your local city office, your household waste disposal service or where you purchased

theproduct.

July,2005

Restriction of the Use of Hazardous Substances (RoHS)

Multi-Tech Systems, Inc.

Certificate of Compliance

2011/65/EU

Multi-Tech Systems confirms that its embedded products comply with the chemical concentration

limitations set forth in the directive 2011/65/EU of the European Parliament (Restriction of the use of

certain Hazardous Substances in electrical and electronic equipment - RoHS)

These Multi-Tech products do not contain the following banned chemicals

• Lead, [Pb] < 1000 PPM

• Mercury, [Hg] < 1000 PPM

• Hexavalent Chromium, [Cr+6] < 1000 PPM

• Cadmium, [Cd] < 100 PPM

• Polybrominated Biphenyl, [PBB] < 1000 PPM

• Polybrominated Diphenyl Ether, [PBDE] < 1000 PPM

Environmental considerations:

• Moisture Sensitivity Level (MSL) =1

• Maximum Soldering temperature = 260C (in SMT reflow oven)

Lead usage in some components is exempted by the following RoHS annex, therefore higher lead con-

centration would be found in some modules (>1000 PPM);

–Resistors containing lead in a glass or ceramic matrix compound.

Appendix A - Regulatory Information