Technical data

Configuration
CPU 317T: Technology Functions
4-18 A5E00251798-03
Working area
The working area shows the dialog boxes for configuring the technology objects,
e.g. configuration, default, limits. The tab elements indicate the technology objects
for which a corresponding dialog box is opened. The view may show several open
dialogs for technology objects.
All editable parameters are assigned hi and lo limits which are indicated in a short
information in S7T Config.
Detail view
The detail view provides information on the elements selected from the Navigator.
Various tabs are opened, depending on the object you selected. The number of
tabs also depends on the number of active dialog boxes on the working area and
on the project status (offline or online).
To view object information in the detail view:
1. Select the relevant object in the project navigator. The detail view shows all
tabs available for this object.
2. Click the tab in the detail view. The tab content is shown.
Title bar
The title bar contains the project name, and description of the active configuration
dialog box of the selected technology object.
Menu bar
The menu bar contains the menus currently available in S7T Config.
Toolbar
The toolbar contains icons which provide quick access to frequently used and
currently available menu commands by means of mouse click. You can view the
short info of the button by holding the mouse cursor briefly on the icon; the status
bar provides further information.
A grayed out symbol indicates that a function can not be executed in the current
operational state.