Technical data

Configuration
CPU 317T: Technology Functions
4-2 A5E00251798-03
4.2 Configuring the Technology CPU and Drives in
HW Config
4.2.1 Configuring the Technology CPU in HW Config
To configure the Technology CPU:
Step Description
1. In SIMATIC Manager, create a new project and add a SIMATIC 300 station.
2. Open HW Config by selecting the "SIMATIC 300" station and double-clicking "Hardware."
3. In the "Hardware catalog" view, select the hardware profile "SIMATIC Technology CPU" from
the "Profile" drop-down list.
4. Copy a profile from the "Hardware Catalog" to the HW Config dialog box.
5. Add the "PS 307 5A" power supply module to the profile by means of drag-and-drop.
6. Drag-and-drop the relevant Technology CPU from the Hardware catalog to the selected line of
the profile. This opens a message window.
Minimize transfer times by increasing the transmission velocity of the MPI/DP interface.
Further information is found in the help dialog of the message box.
7. Close the message box.
In the next dialog box, set the PROFIBUS properties of DP(DRIVE).
8. Click "New" to create a new "Subnet" (DP master system).
Make sure the Technology CPU is the only master station at the DP(DRIVE) master system.