Technical data

Index
CPU 317T: Technology Functions
Index-10 A5E00251798-03
position controller cycle - time model 5-1
position controllers of positioning axes
A-22
position correction 6-73
Position correction 4-58
Position reference 4-85
Position-based cams 3-35, 3-36
Inverted output 3-35
OFF range 3-35
ON range 3-35, 3-36
switching action 3-35
Position-based cams or switching cams
with FB 430 MC_CamSwitch 6-196
position-controlled axis 6-79
velocity-controlled operation 6-83
Positioning and standstill monitoring 4-62
Positioning axis - Technology DB -
Firmware version 3.1.x of the integrated
technology 7-5
Positioning axis technology object 3-13
Positioning monitoring 4-62
POWER OFF 6-253
POWER ON 6-253
Preset - External encoder 4-121
preventing startup of the axis 6-25
Priority - time model 5-1
Process image of integrated technology
4-5
Programming - FBs 6-1
Programming - Overview 6-1
Programming axis-specific parameter
changes 5-17
Programming device 8-1
Programming model 5-8
Programming PC 8-1
Project data volume and operating
conditions - Firmware V3.0x of the
integrated technology 2-5
Proximity switch - Homing 3-8
R
ramping down the following axis
(synchronism) 6-111
Range of values 6-254
Range of values - REAL values 6-254
Reaction of the technology function after
POWER OFF and restart 6-253
Read parameter with FB 406
MC_ReadSysParameter 6-215
Reading data records with FB 453
MC_ReadRecord 6-236
Reading parameters with FB 455
MC_ReadDriveParameter 6-244
Reading points from the cam disk with
FB 438 MC_GetCamPoint 6-192
Reading technology I/O with FB 450
MC_ReadPeriphery 6-226
ReadSysParameter 2-11
ready signal 2-10
REAL range of values - Dynamic
parameters 6-254
Recalculating the cam disk 6-187
Re-initialization of technology objects
6-211
Relative gearing 3-20
Relative positioning to current target
position with FB 412 MC_MoveAdditive
6-67
Relative positioning with FB 411
MC_MoveRelative 6-52
Relative synchronism 3-23, 3-24, 3-26
to leading and following axes 3-22
to the following axis 3-24
to the leading axis 3-22
Release motion - manually 4-40
Release motion - with drive 4-40
Reset - MC_Reset 6-211
Restart 6-253
Restart - After changes in technology
parameters A-32
Restart - MC_Reset 6-211
restrictions for modulo axes 6-68
Rotary axes 3-3
RUN-STOP 6-253
Runtime and programming model 5-6
Runtime model 5-6
S
S7_TraceDINT - Technology DB 7-25
S7_TraceDWORD - Technology DB 7-25
S7_TraceREAL - Technology DB 7-25
S7T Config 2-8, 2-9
S7-Tech library 2-7
S7-Technology 2-8
Save absolute value encoder adjustment
6-223
Scaling 4-96, 4-97
Scaling - Cam disk 3-31
Scaling and phase shift 3-31
Scaling coefficient 3-31, 6-116
SCOUT CamTool 2-2
Selecting the telegram types 4-9
set override 6-221
Setpoint coupling 4-72
Setting actual value coupling at the
synchronization object A-25
Setting new axis positions in synchronized
mode 3-20
Setting the homing position 4-58
Setting the standstill signal A-27
shutdown time 8-5