Technical data

Index
CPU 317T: Technology Functions
Index-4 A5E00251798-03
Engineering tool 2-7
Enum - Technology parameters A-32
Enum values A-56
error message 2-10
ErrorBuffer 5-12, 5-13, 5-14
ErrorBuffer - Technology DB 7-1, 7-5, 7-10,
7-16, 7-20, 7-21, 7-23, 7-26
ErrorIDs - Cam technology DBs - Firmware
version V3.1.x of the integrated
technology 7-55
ErrorIDs - External encoders technology
DB - Firmware version of integrated
technology V3.1.x 7-44
ErrorIDs - MC_CamClear 6-178
ErrorIDs - MC_CamIn 6-130
ErrorIDs - MC_CamInSuperImposed 6-149
ErrorIDs - MC_CamInterpolate 6-190
ErrorIDs - MC_CamOut 6-135
ErrorIDs - MC_CamOutSuperImposed
6-153
ErrorIDs - MC_CamSectorAdd 6-185
ErrorIDs - MC_CamSwitch 6-198
ErrorIDs - MC_CamSwitchTime 6-201
ErrorIDs - MC_ChangeDataset 6-35
ErrorIDs - MC_ExternalEncoder 6-209
ErrorIDs - MC_GearIn 6-109
ErrorIDs - MC_GearInSuperImposed 6-164
ErrorIDs - MC_GearOut 6-114
ErrorIDs - MC_GearOutSuperImposed
6-168
ErrorIDs - MC_GetCamPoint 6-194
ErrorIDs - MC_Halt 6-29
ErrorIDs - MC_Home 6-17
ErrorIDs - MC_MeasuringInput 6-205
ErrorIDs - MC_MoveAbsolute 6-50
ErrorIDs - MC_MoveAdditive 6-71
ErrorIDs - MC_MoveRelative 6-65
ErrorIDs - MC_MoveSuperImposed 6-77
ErrorIDs - MC_MoveToEndPos 6-95
ErrorIDs - MC_MoveVelocity 6-88
ErrorIDs - MC_Phasing 6-140
ErrorIDs - MC_PhasingSuperImposed
6-175
ErrorIDs - MC_Power 6-9
ErrorIDs - MC_ReadDriveParameter 6-245
ErrorIDs - MC_ReadPeriphery 6-229
ErrorIDs - MC_ReadRecord 6-237
ErrorIDs - MC_ReadSysParameter 6-216
ErrorIDs - MC_Reset 6-213
ErrorIDs - MC_SetTorqueLimit 6-99
ErrorIDs - MC_Stop 6-23
ErrorIDs - MC_WriteDriveParameter 6-249
ErrorIDs - MC_WriteParameter 6-224
ErrorIDs - MC_WritePeriphery 6-234
ErrorIDs - MC_WriteRecord 6-241
ErrorIDs - MCDevice / Trace technology
DB - Firmware version of integrated
technology V3.1.x 7-58
ErrorIDs - Measuring sensor technology
DB - Firmware version V3.1.x of the
integrated technology 7-52
ErrorIDs - Output cam technology DB -
Firmware version V3.1.x of the integrated
technology 7-49
ErrorIDs - Synchronization technology
DB - Firmware version V3.1.x of the
integrated technology 7-36
ErrorIDs - Technology DB 7-1, 7-5, 7-10,
7-16, 7-20, 7-21, 7-23, 7-25, 7-26
ErrorIDs - Technology DB axes - Firmware
version of integrated technology V3.1.x
7-30
Errors and warnings at the axes & external
encoders technology DB 5-13
Errors and warnings at the technology DB -
Cam disk & Measuring sensor & Cam
5-14
Errors and warnings at the technology
function 5-11
Errors at the technology DB - MCDevice &
Trace 5-12
Errors occur when the "Save and compile
all" function is executed for the
technology data A-18
ErrorStatus - Technology DB 7-1, 7-5,
7-10, 7-16
ErrorStatus.xxx 5-13
Example - Electronic cam control 3-43
Example - Flying shears A-3
Example - Gripper feed A-5
Example - MC_CamInSuperImposed -
Superimposition 6-145
Example - MC_CamOut 6-134
Example - MC_ChangeDataset 6-34
Example - MC_GearIn 6-104
Example - MC_GearInSuperImposed -
relative/absolute 6-160
Example - MC_GearOut 6-113
Example - MC_Halt 6-28
Example - MC_Home 6-16
Example - MC_MoveAdditive 6-70
Example - MC_MoveToEndPos 6-93
Example - MC_Phasing 6-139
Example - MC_PhasingSuperImposed
6-173
Example - MC_Power 6-7
Example - MC_ReadPeriphery 6-227
Example - MC_Reset 6-7
Example - MC_Stop 6-22
Example - MC_WriteParameter 6-221
Example - MC_WritePeriphery 6-232