Technical data

Appendix
CPU 317T: Technology Functions
A5E00251798-03
A-57
Name
(Expert list in S7T Config)
Values Description S7 Int.
technolog
y
EDGE_POS_SIDE_
NEG_PASSIVE
Positive edge at negative side BERO 17 2
EDGE_POS_SIDE_
POS_PASSIVE
Positive edge at positive side BERO 18 3
EDGE_NEG_SIDE_
POS_PASSIVE
Negative edge at positive side BERO 19 4
EDGE_NEG_SIDE_
NEG_PASSIVE
Negative edge at negative side BERO 20 5
ACTUAL_DIRECTION_
PASSIVE
next edge 21 6
EnumAxisPassiveHomingMode CAM_AND_ZM_PASSIVE BERO and zero mark 22 1
ZM_PASSIVE Zero mark only 23 2
CAM_PASSIVE BERO only 24 3
DEFAULT_PASSIVE Preset depending on encoder type
with zero mark: ZM_PASSIVE
without zero mark: CAM_PASSIVE
25 4
EnumBackLashDiff DIFF_POSITIVE Positive 26 0
DIFF_NEGATIVE Negative 27 1
EnumBackLashType NEGATIVE Negative 4 1
POSITIVE Positive 5 0
EnumBalanceFilterMode OFF Symmetry filter disabled 89 0
MODE_1 Balance filter enabled 90 1
MODE_1 Extended balance filter enabled 91 2
EnumCamInterpolationMode B_SPLINE Approximation by means of Bezier splines 28 25
C_SPLINE Interpolation by means of cubic splines 29 38
LINEAR Linear interpolation 30 72
EnumCammingDirection USER_DEFAULT User default / default 2 149
EFFECTIVE Last programmed direction 3 45
NEGATIVE In the opposite direction 4 85
POSITIVE In the same direction 5 107
EnumCammingMode USER_DEFAULT User default / default 2 149
EFFECTIVE Last programmed setting 3 45