Technical data

Appendix
CPU 317T: Technology Functions
A-56 A5E00251798-03
A.4.2 List of DINT values for technology parameters
The list below contains the DINT values of technology parameters, for which several ranges of values can be selected. These specifications are
required, when using FB "MC_WriteParameter" to edit the parameters of technology objects.
Name
(Expert list in S7T Config)
Values Description S7 Int.
technolog
y
EnumActiveInactive INACTIVE - 0 61
ACTIVE - 1 4
EnumAxis Approach Direction APPROACH_NEGATIVE Approach direction negative zero mark 15 0
APPROACH_POSITIVE Approach direction positive zero mark 16 1
EDGE_POS_SIDE_NEG Positive edge at negative side BERO 17 2
EDGE_POS_SIDE_POS Positive edge at positive side BERO 18 3
EDGE_NEG_SIDE_POS Negative edge at positive side BERO 19 4
EDGE_NEG_SIDE_NEG Negative edge at negative side BERO 20 5
EnumAxisEncoderAssemblyType ASSEMBLY_BASE_DRIVE Drive side 83 0
ASSEMBLY_BASE_LOAD Load side 84 1
ASSEMBLY_BASE_EXTERN External 85 2
ASSEMBLY_BASE_LINEAR LINEAR 86 3
EnumAxisFilterMode DEFAULT_MODE Mean value of the IPO clock to Servo clock ratio 9 0
AVERAGING Mean value 10 1
PT1 Smoothing by filtering; adjustment based on time constant 11 2
EnumAxisFineInterpolatorMode DIRECT_MODE No interpolation 12 0
LINEAR_MODE Linear interpolation 13 1
CUBIC_MODE Constant speed interpolation 14 2
EnumAxisHomingMode MODE_CAM_AND_ZM BERO and zero mark 22 1
MODE_ZM Zero mark only 23 2
MODE_CAM BERO only 24 3
MODE_NO_REFERENCE no mode 88 0
EnumAxisPassiveApproach Direction APPROACH_NEGATIVE_
PASSIVE
Approach direction negative zero mark 15 0
APPROACH_POSITIVE_
PASSIVE
Approach direction positive zero mark 16 1