Technical data

Appendix
CPU 317T: Technology Functions
A5E00251798-03
A-47
No. Name
(standard in S7T Config)
Name
(Expert list in S7T Config)
Data type Index min. max. Access Active D P V Description
4231 Limits "Mechanical end stop"
Clamping value
userdefaultclamping.
clampingvalue
REAL - 0.0 1E+12 R, W Immediately X X Clamping value (e.g. running
up to a mechanical end stop)
4241 Default values Default value.
Dynamic. direction
userDefaultDynamics.direction DINT Enum
Direction
- - - R, W Immediately X X X Direction preset
4242 Default values Default value.
Dynamic. Negative
acceleration
userDefaultDynamics.
negativeAccel
REAL - 0.0 1E+12 R, W Immediately X X X negative acceleration /
deceleration
4243 Default values Default value.
Dynamic. Jerk at end of
deceleration
userDefaultDynamics.
negativeAccelEndJerk
REAL - 0.0 1E+12 R, W Immediately X X X jerk limiting during
deceleration
4244 Default values Default value.
Dynamic. Jerk at the start of
deceleration
userDefaultDynamics.
negativeAccelStartJerk
REAL - 0.0 1E+12 R, W Immediately X X X jerk limiting during
acceleration
4245 Default values Default value.
Dynamic. Positive
acceleration
userDefaultDynamics.
positiveAccel
REAL - 0.0 1E+12 R, W Immediately X X X Positive acceleration
4246 Default values Default value.
Dynamic. Jerk at the end of
acceleration
userDefaultDynamics.
positiveAccelEndJerk
REAL - 0.0 1E+12 R, W Immediately X X X Limiting jerk at the end of
acceleration
4247 Default values Default value.
Dynamic. Jerk at the start of
acceleration
userDefaultDynamics.
positiveAccelStartJerk
REAL - 0.0 1E+12 R, W Immediately X X X Limiting jerk at the start of
acceleration
4248 Default values Default value.
Dynamic. Speed profile
userDefaultDynamics.profile DINT Enum
Profile
- - - R, W Immediately X X X Speed profile type
4249 Default values Default value.
Dynamic.Emergency-stop
time
userDefaultDynamics.stopTime REAL - 0.0 1E+12 R, W Immediately X X X Specified time for emergency-
off
4250 Default values Default value.
Dynamic. Speed
userDefaultDynamics.velocity REAL - -1E+12 1E+12 R, W Immediately X X X Specified speed
4262 Synchronous operation
Synchronous cam operation
(cam synchronism) Master
offset
userdefault. cammingsettings.
camstartpositionmaster
REAL 1-2 -1E+12 1E+12 R, W Immediately X Offset for cam disk start
position at 'relative' master
4266 Synchronous operation Curve
synchronization Synchronizing
mode
userdefault.cammingSettings.
synchronizingMode
DINT Enum
Sync Mode
Camming
1-2 - - R, W Immediately X Cam disk synchronizing
criterion