Technical data

Appendix
CPU 317T: Technology Functions
A-34 A5E00251798-03
No. Name
(standard in S7T Config)
Name
(Expert list in S7T Config)
Data type Index min. max. Access Active D P V Description
1100 Mechanical spindle setting.
Spindle pitch per axis revolution
LeadScrew.pitchVal REAL - 0.0 1E+12 R, W Restart X X Spindle pitch per axis
revolution
1110 Synchronization extrapolator.
Extrapolation time
TypeOfAxis.Extrapolation.
ExtrapolationTime
REAL - 0.0 1E+12 R, W Immediately X X Extrapolation time for master
axis
1111
Synchronism.Extrapolator.Filter.
Mode
TypeOfAxis.Extrapolation.
Filter.Mode
DINT
EnumAxis
FilterMode
- - - R, W Restart X X Selection criterion for actual
value smoothing
1112
Synchronism.Extrapolator.Filter.
Activation
TypeOfAxis.Extrapolation.
Filter. enable
DINT
EnumYesNo
- - - R, W Immediately X X Activation status
1113
Synchronism.Extrapolator.Filter.
Time constant
TypeOfAxis.Extrapolation.
Filter. timeConstant
REAL - 0.0 1E+12 R, W Immediately X X Time constant for PT1
smoothing
1114 Synchronization extrapolator.
Tolerance range.Activation
TypeOfAxis.Extrapolation.
ToleranceRange.Enable
DINT
EnumYesNo
- R, W Immediately X X Enable tolerance range
1115 Synchronization extrapolator.
Tolerance range.Tolerance
window
TypeOfAxis.Extrapolation.
ToleranceRange.Value
REAL - -1E+12 1E+12 R, W Immediately X X Tolerance window
1120 Homing.Distance to Bero TypeOfAxis.Homing.
beroDistance
REAL - 0.0 1E+12 R, W Immediately X X Traversing distance to BERO
1121 Homing.Approach direction TypeOfAxis.Homing.direction DINT Enum
DirectionType
- - - R, W Immediately X X Approach direction when
homing
1122 Homing.Enable Bero monitoring TypeOfAxis.Homing.
enableBeroDistance
DINT
EnumYesNo
- - - R, W Immediately X X Monitoring mode enable
status
1123 Homing.Homing necessary TypeOfAxis.Homing.
homingNecessary
DINT
EnumYesNo
- - - R, W Immediately X X Homing necessary
1201 Mechanical Modulo. Activation Modulo. state DINT Enum
active /
inactive
- - R, W Restart X X Activation of modulo settings
1202 Mechanical Modulo. Length Modulo. length REAL - 1E+12 R, W Restart X X Modulo length
1203 Mechanical Modulo. Start value Modulo. startValue REAL - -1E+12 1E+12 R, W Restart X X Modulo start value
1211 Monitoring Acceleration
Activation
TypeOfAxis.
ActualAccelerationMonitoring.
enable
DINT
EnumYesNo
- - - R, W Immediately X X Enable actual acceleration
monitoring
1212 Monitoring Acceleration
Maximum value
TypeOfAxis.
ActualAccelerationMonitoring.
maximum
REAL - -1E+12 1E+12 R, W Immediately X X Maximum permitted actual
value of acceleration