Technical data

Appendix
CPU 317T: Technology Functions
A5E00251798-03
A-15
A.2.2 How to edit a V1.0 project with S7-Technology V2.0
Query:
My current project was created with SIMATIC S7-Technology V1.0. Can I maintain
compatibility with S7-Technology V1.0 when I edit the project in
S7-Technology V2.0?
Answer:
Yes, you can edit the project and maintain compatibility with S7-Technology V1.0
as shown below. Procedure:
1. In SIMATIC Manager, select "Technology objects", then select Options > Configure
technology
2. This dialog box appears when S7T Config opens:
3. Confirm the message with "OK."
(You can reconvert the project after you close S7T Config.)
4. Make your relevant changes.
5.
Select Project > Save and compile all.
5a. Open Technology Objects Management (double-click "Technology objects" in
SIMATIC Manager) if you have added or deleted technology objects. Continue with
step 6 if if you have not added or deleted any technology objects.
5b. Create or delete the corresponding technology DBs as described in "Creating and
managing technology DBs".
5c. Close Technology Objects Management.
6. Close S7T Config.
The dialog box shown below opens when you close S7T Config: 7.
8. Confirm with "Yes" to allow further editing of the project in S7-Technology V1.0.