Technical data

Download, testing and diagnostics
CPU 317T: Technology Functions
8-38 A5E00251798-03
• Selection area
Click the relevant buttons to show or hide specific areas.
In monitoring mode, you can select the axis. All axes configured in the
technology are available for selection.
• Control area (hide or show by means of the button
)
In this area, you can assume control priority over the selected axis and sent
motions commands to it.
In monitoring mode, only the "Trace Editor" button is enabled.
• Monitoring area (hide of show by means of the button
)
You can monitor the data for the axis you have selected in this area:
- in monitoring mode:
You can test motions initiated in the
user program.
- in control mode:
You can test motions which have been
triggered by commands to the axis.